Tridak, a producer of standard and custom fluid dispensing equipment, introduces their model 775 spool dispensing valve. The 775 dispensing valve handles tacky materials with ease and eliminates unwanted problems that are inherent with stringy and low viscosity materials. This valve offers an adjustable and lockable suck-back control, as well as adjustable and lockable flow control.
6/11/2009
Tridak™ 775 Dispensing Valve Features Adjustable Suck-Back and Flow Control
Tridak, a producer of standard and custom fluid dispensing equipment, introduces their model 775 spool dispensing valve. The 775 dispensing valve handles tacky materials with ease and eliminates unwanted problems that are inherent with stringy and low viscosity materials. This valve offers an adjustable and lockable suck-back control, as well as adjustable and lockable flow control.
The suck-back feature of the 775 spool dispensing valve greatly increases accuracy and repeatability when dispensing materials. Having control over the amount of suck-back assures consistent, string-less dispensing of tackier materials, and prevents droplets from remaining on the dispense nozzle when using low viscosity materials. The valve’s other key feature, adjustable flow control, gives users the ability to have complete control over the amount of material dispensed. The 775 valve can dispense volumes as little as 0.01ml. These features greatly increase the versatility, accuracy, and repeatability of this valve’s dispense.
The model 775 valve is recommended for use with a variety of different low-to-high viscosity materials including adhesives, solvents, oils, grease, sealants, plastisols, oils, RTVs, pastes, gels, and acids. This valve can be used with a number of different components to make the fluid dispensing process faster and more efficient. Tridak can also modify this valve to meet a company’s specific requirements.
Tridak LLC, a DYMAX Company, specializes in fluid dispensing technology. It manufactures a complete line of precision dispense valves, electro-pneumatic dispensers and controllers, disposable packaging, and complete dispensing and filling systems for industrial assembly and packaging.
For more information, contact Tridak, 318 Industrial Lane, Torrington, CT 06790; Phone: 860-626-6700; Fax: 860-626-7692; e-mail: info@tridak.com or visit our web site at www.tridak.com.
Balls: Valve
Valve Plugs
Dispensing Closures
Valve Controls
Valve Covers
Valve Discs
Machinery: Dispensing
Valve Fittings
Valves: Penstock
Valve Grinders
Wire Handles
Valve Housings
Valve Position Indicators
Valves: Fuel Injection
Valve Interlocks
Valve Tapping Machinery
Valve Needles
Valve Packing
Valve Stem Packing
Valve Positioners
Valve Seat Rings
Valve Seals
Valve Seats
Valve Springs
Valve Stems
Valve Strainers
Valve Testers
Tool Dispensers: Automatic
Valves: Aluminium
Valves: Right Angle
Valves: Trunnion
Valves: Non-Return
Valves: Check, Swing Type
Valves: Air Compressor
Valves: Low-Noise
Dispensing Valves
Valves: Inlet
Y-Type Valves
Valves: Manually Operated
Hydraulic Valves
Valves: Steam Jacketed
Knife Gate Valves
Valves: Sub-Sea
Pneumatic Valves
Valves: Vacuum Relief
Valves: Magnetically Operated
Valve Gates
Valve Bonnets
Valve Spring Shims
Valve Guides