This low frequency, long-range, fixed RFID reader, model 212007, has an IP66 protection rating allowing for robust operation even in harsh environmental circumstances. Its Integrated Diagnosis Module (IDM) enables on-site diagnosis for noise problems without requiring additional instruments such as an oscilloscope or a system analyzer.
SMP has developed chokes for a well-known German manufacturer of CT scanners. The inductive components are installed in so-called gradient amplifiers, which supply output voltages and currents that are used to control the gradient coils.
The new PyroBus series is designed to measure the temperature of inaccessible or moving objects and materials, from -20°C to 500°C, accurately and consistently, with an outstanding response time of 240 ms.
The RFID reader/writer utilizes advanced MIFARE I contact-less RFID technology to enhance collection of information associate with RFID cardholders. It is commonly used in retail stores, libraries, and any point of sale application.
Qualitest’s shrinkage cone is designed to accurately measure the shrinkage or expansion of concrete, cement, mortar and other fluid building materials.
Independently tested for compliance to ATEX standards for use in Zone 2 and Zone 22 environments, the new EXP series is manufactured from a tough high grade UL94V-0 rated Polycarbonate material. Similar in construction to Bulgin’s popular 900 Series Buccaneer, the connectors are environmentally sealed to IP68 to provide protection for the most severe of dust and water borne environments. Ambient temperature range is from -20°C to +55°C.
A unique design of wheel bearing has been launched that is not only 10 per cent lighter than previous versions, but is also more compact, more precise and provides simplified mounting.
The RFID reader features enhanced interference rejection, monostatic antenna connections, a small footprint and high read rate. It can be easily integrated with RFID software and is ideal for supply chain or manufacturing and asset management applications.
Elesa’s RE.G1 has direct bearing wheels with precision tube axles and rugged twin race zinc plated steel chassis. It is recommended for loads up to 250Kg per castor and for use on tiles, asphalt, cement/resin or expanded metal in the presence of humid environments and medium aggressive chemicals at between -20°C and +80°C.
Emerson Network Power, a business of Emerson and the global leader in enabling Business-Critical Continuity™, today announced its highest-wattage 12 V front-end distributed power supply, the DS2900.
Ultra-Red™ fluorescing technology built into many DYMAX adhesives offers assemblers concrete advantages in plastics fabrication. Ultra-Red™ fluorescing adhesives remain naturally clear until exposed to UV light, at which point they fluoresce bright red providing a vivid contrast that permits accurate bond-line inspection.
PREMO has developed a new emitter antenna series, the KGEA-BFCAM, for passive keyless entry system for automotive application.
Recognizing the need in the industrial market for a highly reliable valve that delivers consistent fluid volume deposits with low viscosity materials, Tridak designed and developed the Model 765 needle valve. This valve is ideally suited for non-reactive adhesives, silicone oils, inks, and solvents, and can be used in processes such as device assembly, packaging, optics assembly, and building PCBs.
DYMAX Cure-Point™ 9440-A/B cures to depth in seconds upon exposure to UV/visible light to provide protection to electronic components and circuitry. It is a UV/visible light-curable silicone potting and sealing material designed for applications where fast cure, enhanced thermal performance, and room-temperature shadowed-area cure are required. Cure-Point 9440-A/B has a >90 day room temperature mix life.
The 0ZCx Series is appropriate for use on high-density PC boards in a wide array of consumer electronics applications in which safety and reliability are critical factors. They are commonly specified for use in PDAs/digital cameras, MP3 players, video recorders, and set-top boxes.
The Arcos 309/309L bare wire (ER309/309L) and covered (E309/309L) electrodes can be utilized for welding Type 304 and similar base metals, where severe corrosion conditions exist.
Fast switching generated by IGBTs causes high voltage ramps (greater than 4000V/µs), that may be even higher in the motor windings. The fast switching can also shorten the motor life and limit the maximum cable lengths. PREMO has developed a new dv/dt output filter, the FOVT series, to guarantee that the maximum peak voltage will be under 1000V with a dv/dt value less than 500V/ µs.
The key factor of Electronics for Power Conversion in Renewable Energies is EFFICIENCY. The PREMO AIC Technology is the most efficient in the market in terms of copper and core losses. A new 3- Phase Inductor is presented by Premo with 99,60% efficiency!
Micro-Epsilon’s thermoIMAGER i series comprises three models, the i5, i40 and i50. Starting from £1,995, the thermoIMAGER i5 is a compact, lightweight, multi-purpose infrared camera that requires little training and provides engineers with a low cost ‘point-shoot-detect’ camera.
GAO RFID Asset Tracking offers its outstanding 125kHz RFID handheld guard patrol tour terminal, which scans RFID tags and stores their ID-codes in its journal-based memory.
Signing up is quick and easy